BeamLab — Beam Deflection Calculator

日本語版

How much will this beam bend — and is it strong enough? Work through Steps 1–4 in order: support case, material, cross-section, then span and load. Max deflection, bending stress and safety factor update live in the bar at the top as you drag the sliders, with the full results and diagrams at the bottom. No calculate button, no sign-up. Units: mm and N throughout.

1

Support & load case

2

Material

Property values are indicative

3

Cross-section

I, Z and A are calculated automatically

ON: snaps to standard sizes · OFF: free values

Details

When ON: the current values also move to the nearest standard value.

Thicknesses (t · tw · tf): JIS standard plate series — 1.6 / 2.3 / 3.2 / 4.5 / 6 / 9 / 12 / 16 / 19 / 22 / 25 / 28 / 32 / 36 / 40 / 45 / 50 mm …

Other dimensions (span, width, height, diameter, etc.): steps based on preferred numbers (JIS Z 8601 / ISO 3, R20 series).

When OFF: any value can be set freely with the slider or the number field.

Moment of inertia I
–
Section modulus Z
–
Area A
–
Drawn to scale · dashed line = neutral axis (NA)
4

Span & load

mm
mm
N

ON: snaps to round values · OFF: any value

Details

When ON: the current value also moves to the nearest round value.

Point loads: 10 / 20 / 50 / 100 / 200 / 500 / 1,000 / 2,000 / 5,000 / 10,000 / 20,000 / 50,000 / 100,000 N — the full range the load field accepts. Uniform loads snap to round values across their full range too.

When OFF: any value in between can be set. The load slider is logarithmic, so small and large loads are equally easy to set.

5

Diagrams

Updated live on every change

Beam & deflection curve

Bending moment diagram

Shear force diagram

6

Results

Updated live on every change
Max deflection δ
– mm
–
Max bending stress σ
– MPa
–
Guide: 1.5–2 for static loads · 3+ for impact or repeated loads — general reference only, not a design rule.
Max bending moment M
– N·mm
–
Support reactions
–
Beam weight
– kg
–
Deflection ratio
–
Span ÷ max deflection. A common design reference is L/200 – L/300 for general structures.